Wednesday, March 16, 2016


Samsung Galaxy S7 နဲ႔  S7 Edge အတြက္ Root ေဖါက္နည္းကို ေတာင္းဆိုေနၾကလို႔ မူရင္းအတိုင္းတင္ေပးလိုက္ပါတယ္..။
 Root ေဖါက္တဲ့အတြက္  Warranty ပ်က္ျပယ္မွာျဖစ္ပါတယ္...။
 ဘာမွမလုပ္ခင္ ဖုန္းထဲက အေရးၾကီးတာေတြကို Backup လုပ္ထားပါ...

Firmware ေလးပါေဆာင္ထားႏိုင္ရင္ အေကာင္းဆံုးပါ... :)

Root ျပဳလုပ္နည္းကေတာ့ ထံုးစံအတိုင္း Odin ကေန TWRP Recovery တင္္ျပီး SuperSU.Zip ကို Flash ေပးရမွာပါ..။

ေအာက္မွာ မိမိဖုန္း Model အလိုက္TWRP ကို မွန္ကန္စြာ ေဒါင္းယူပါ...။

လိုအပ္တာေတြေဒါင္းျပီးသြားရင္ ဒီပို႔စ္ေလးအတိုင္း ဆက္လုပ္လိုက္ပါ..။

TWRP For Samsung Galaxy S7 and S7 Edge

  • Download TWRP for Galaxy S7[Exynos] Download | twrp-
  • Download TWRP for Galaxy S7[Qualcomm] Download | twrp-
  • Download TWRP for Galaxy S7 edge[Exynos] Download | twrp-3.0.0-1-hero2lte.tar.md5
  • Download TWRP for Galaxy S7 Edge[Qualcomm]
    Download | Coming Soon…
  • Official TWRP for Samsung Galaxy S7 → Link

Other Important Files You Will Need


How to Install TWRP on Samsung Galaxy S7 and S7 Edge And Root

Step 1: Download and exact the TWRP tar image file for your for your Galaxy device. Extract the zip file to get the firmware with .tar or .tar.md5 extension and place at a location where you can easily locate it in your PC. 

Step 2: Now boot your device into Download/Odin Mode. To do so, turn off your device completely and then press and hold Power button + Volume Down + Home keys for a few seconds. If you see a warning sign press Volume up/ Volume down to get the Odin screen.

Step 3: If you already have Odin software on your PC then simply run the Odin3_3.10.7.exe file. If not, then download the file from the download section and extract it. Run Odin software as administrator.

Step 4: While your device is still in the Odin Mode, connect your device to your PC using a USB cable.

Step 5: After a successful connection, the ID: COM in the Odin should turn Blue and anAdded!! message should be displayed in the Log tab. In case your device doesn’t show up in Odin, then you can troubleshoot it with the steps given at the end of the tutorial.

Step 6: Now click on AP button and add the firmware file by navigating to the file path. Once added, it should show like this — File Path\twrp-

Step 7: Take care that only Auto Reboot and F.Reset Time are selected in the Options tab. Do not check Re-Partition.

Step 8: Once done, verify everything and proceed with installation by selecting Start button.

Step 9: Once you install the TWRP Recovery, boot into it with the button combinations like Volume Up + Power while the device is turned off completely.

Step 10: Now take a Nanadroid backup and perform a wipe. Go to Wipe>Advanced Wipe andFormat Data only.

 Step 11: Now flash the dm-verity and force encryption disabler by tapping Install.

Step 12: Similarly flash the SuperSU package from the downloads.

Step 13: Now reboot to system.

Source: XDA 1XDA 2XDA 3


Post a Comment